Our personnel have worked in the heavy transportation and lifting industry for several years. Some of our current and past working relationships include:
Transportation Structures
The design of transportation saddles, transport beams, module beams, module stands, jacking bands and jacking lugs
Man Basket Design
The design of man baskets for hoisting personnel
Prill Tower Removal Demolition
This project was very interesting, each floor of the tower had to be removed in sections. These sections had to […]
Concrete Stack Removal Demolition
This project entailed a Concrete Stack in a permanent structure. This concrete stack was a one-piece design and too large […]
Tower Jack and Slide
Jack and Slide of this tower placed a lot of stress on the sliding equipment. The vessel was 30’-0” in […]
Vessel Removal From Second Floor of Modular Building
Removing vessels from remote areas can be challenging. This vessel was one floor up around twenty feet in elevation. The […]
Wash Water Heater Vessel
This vessel was small but it was located in a very difficult location for removal. This vessel was vertical, standing […]
Gantry Systems
Formula/Bradley Engineering has designed gantry systems for multiple applications. One of the applications that was a challenge and required a […]
Conveyer Launcher Project
This project was a complete redesign of our standard jack and slide systems. The tight confinement of the vessel left […]
Bridge Jacking
Jacking bridge sections and LRT sections are projects we have done for a long time. The LRT section weighs 1200 […]
Speciality Projects
This project required a few months of design to remove Spray Booms from a two-story building. The drawing below shows […]
Our personnel have worked in the heavy transportation and lifting industry for several years. Some of our current and past working relationships include:
